Modern facade panels
For yes, you will give good support and an attractive appearance to the kashchat, despise the last years in construction and repair, all the more often, it will use old and hopeful panels, imitating natural materials. Using a variety of types and a wide range of colors for the facade panels, the designer and the possibility of realizing the most extraordinary ideas, thanks to the gradation adding refinement and special originality.
Panel façade is sustainable, environmentally friendly, decorative material, applied on the top of the cladding on the wall on the panel. Exterior façade panels stylized as traditional cladding materials and superior in comparison to those in terms of performance and price. Particularly popular are the options for the panels, which will offer you an extra look with rotten facings, shisti or kamak divas.
Where are the facade panels used?
Takiva panels are intended to be somehow revetted on the front of the facade on the kashta, and on the other side of the separate parts. In the first place, mazeto is in need of protection from cato nay-vulnerable often from kashchat. Raztopenata water, temperature difference between vishnata and vtreshnata often on the stenata, interseasonal deformations and other unfavorable factors and the destructive effect of the top of the mazeto. Successfully avoiding complications is possible in case of use on the front panel.
Facade panels can be removed and allow you to highlight the individual elements on the wall. Panels sa in the state and underline the graceful veranda, arch, colonies. Those can and be crawled beyond the limits of the wound on vision and lies.
For fixirane on the first red panel, I crawled out the initial tape. Vv fugite on vnshnit yogli trebva and behold, from crawling vnshen ygl. J-profile is crawling for decorating on insight, lying and trembling. Possibly e and ce from crawling and kato completing the element. The zone between the base and the main part is decorated with a border on the façade. But the frontier is not trebbling, and all because of the kato is a marginal element.
How can we count the armor on the panel and add the elements?
1. How many facade panels are required?
For yes, determine the area on the facade cladding, and it is necessary to calculate the total area on the wall on the kashchat, and yes, from the outside of the area on the aperture and turn. Don’t beat too much and add 10% to get the result for packaging and topping up or dory add 15%, as a result of complex architectural forms. The resulting number of trials and even divided by 4.55, which is somewhat equivalent to a square meter. meters in a single package from "rotten" and "kamak", or 4.52, which is why panels from the "shisti" type are used.
2. How much is the starting profile for you?
Calculate the perimeter by the edge and take from it the total width on the gate and then divide it by 3, which is the length of the initial tape in meters. For packaging and priming, add 5%.
3. How much did you see?
Add a height to the top of the head and divide it by 0.45, which is the height to work on the surface of the head of the element in the measurement. Do not take away and add 5% for packaging and priming.
4. How many J-profile do you need?
For yes, you will analyze the needs of the J-profiles, add the height to the tops of the vtrshshni and the gly to the kashchat and I multiply by 2, then divide some by 3, some of it is long by the J-profile in the measurement. Ako J-profile ce crawled out of the kato close the element, togava the perimeter on the fence is divided by 3. Ako J-profile ce crawled out of the decorirane on the opening for the gates and insights, sumat from the perimeter to the vaults of the insights, somehow turn (minus the length of the country for every gate) tryabva yes bde divided into 3. For packaging and priming, all damage is added by 5%.
5. How much border is needed?
For yes, calculate the required amount of border per border, add visochinata per troshny gli per kashta and divide by 0.517, which is the length per borderata in meters. Ako curb se use for decoration on prozorci and vrat, sumat from the perimeter on vzchki prozorci, somehow and on vratite (minus the length of the country for every gate), dividing by 0.517. For packaging and priming, all damage is added by 5%.
6. How many fasteners are needed?
All the panels are iziskva pone 5 fasteners of the element. In the head of the element - 4 or more. On the curb - pone 2. For fixing on the starting tape sa you need 10 broyas (every fixing all the perversions at a distance of 30 cm from each other).
How is the panel mounted?
When mounted on a facade panel, use self-tapping screws with a recessed head or galvanized pironi. Humidity on the darvenata shaiga, at the top of some of the panels, not shaking and overhanging 20%. Darvoto e impregnated with fire-resistant and antiseptic substances. It is imperative that you take it by the chaygata with a section of 45x30 mm.
When you put it on the top, fly on the shaigata tryabva and put it vertically, step back from everything ygl from 10 cm. Panel on the façade on the gradata tryabva and se montirat horizontally, kato se posochne from the dolnia lyav ghl and se move nagorno and upland.
Don’t interfere with it and replace it with another wall, without it, complete the work according to the predishnat, y kato panels from different partidis can easily and sly differ in syanka. Tryabva yes, remember that the facade panels and profiles for tyah can and will change, measure and change at temperature, such a vinagi tryabva and leave a gap between the edge of the panel and the vertical profile.
In the center on a special opening, fasten self-tapping screws or nails. Shapkata tryabva and until the end of the front panel is possible very little, such a thing and ima luft at a change in temperature. It is extremely important that you mount the fasteners under the right angle directly on the panel and avoid movement.
Facade panels are cut with a hacksaw with a tank tooth or a circular trion. Ryazaneto soil from the country, somewhere from the location of the perforation. But the line is not based on the gradient, it is unequal, the length of the red panel is torn at the end and the installation on the initial tape is not all perverted.
The beginning of the tape was a tryabva and a fixed one strictly horizontally at the nai-niskata point on the stenata, 10 cm from the angle to the fence. Control all the perversion with the help of the field. The beginning of the tape is tryabva and varvi on one and eating the height along the whole perimeter on the kashchat.
Mounting on the parviya vnshen gal zapochva from the leviya rb. It is necessary to eat and comprehend the coincidence on the long line of the rbb on the outside ygl on the prvia red along the height from the long border to the beginning of the tape. Do not overthrow and strengthen more from two outsides at the same time.
How do you mount the facade panels?
Prviyat panel tryabva yes put it in the starting tape and yes it’s izbuta in the zhleb on the outside gal, for that put the holiday from 2-3 mm with a positive temperature in the air and 4-5 mm when frozen. Do not pick up and lock L-shaped keys on the head on the panel. It is necessary to have food and all the guarantor, which, when ryazan is on a fish on a panel, is included in the zhleba, se spasva is strictly right. Parviyat and the last panel on red tryabva and bdat podryazani. Dzhinata on the last façade panel tryabva and more than 30 cm.
For yes, spend money on the material, you can use it often from the panel to the beginning to another red. Open for the second horen of red sa destination for fastening on the panel of kam shaygat. The penultimate panel is a tryabva and there is a fixed one with one smoky head from the Levia Rb, so you can and fire a friend country. When mounted on the last panel, it’s all round, two panels are joined together and a trace of an onslaught on the connection to the edge. Following the final fix to them. For yes, install the next edition, try and put the upper panel on the bottom and move the trace of it right away, as far as possible from the previous one.
When decorating on the gates and visions, the J-profile is initially fixed along the vertical plane. The next is the installation of all the perversions in the gornat, often on the seer or the gate. In this case, it is necessary to ensure that the edges on the J-profile look exactly at the width of the J-profile itself. And it is not necessary to first send the cuts to the J-profile. After eating the beginnings, open this decoration for the gates and visions, this is the border.
In an honest way, the boundary is applied when lining on the basement. To the e is attached to the panel on the cross-border on the basement and the main surface is on the fence and the fixed stone of the stenat. Ako cyalata the structure is lined with a front panel, togawa follows rede e montiran on the curb. Once again, using vinyl siding for finishing on the façade, start the perforation curve tape on the curb. As well as it is necessary to install additional elements and fix the panels at the top, these elements are also required to fix only the top of the panel.
In conclusion, they can whiten and whiten, follow the recommendations for cladding on the cabinet from the facade panel:
- protection on the wall on the kashchat from atmospheric deadwood;
- resistance on the panel to corrosion, temperature fluctuations, ultraviolet radiation;
- no need for special preparation on the wall for installation;
- montage can be perverted at any time for a year and at any time;
- relative simplicity and accessibility to the installation;
- vzmozhnost for izpolzvane for the old fence;
- attaching to the fence is a clean visual appearance.
Thanksgiving for the quality theses, there is an unmistakable quality on the facade panel.
